Model A Bulk Solids Sampler
Get Started
Request A QuoteStill Have Questions?
Contact UsAccurately sample homogenous material from your screw conveyor, drag conveyor, or gravity chute with the Model A Bulk Solids Sampler.
By using a sliding gate controlled by an air cylinder, the product can easily be discharged through a flexible hose without affecting sample integrity or other processes.
- Available in 1-1/2” inch or 3 inch (38 mm or 76 mm) diameter discharge tube to capture a variety of product sizes.
- This bulk solids sampler has a variety of options to suit specific applications – release coating, QPQ hardening, pre-plumbed filter regulator, and more.
- 300 series stainless steel construction.
- Seal kits and sample containers available to meet your repair and sampling needs
Particle Size
- The recommended particle size for the A Bulk Solid Sampler is 10 µm to .25 in (6 mm).
Process Locations
- Model A Sampler's recommended sampling location is on screw or drag conveyors.
- The sampler dimensions are dependent on process customization.
Related Resources
Learn more about how the Model A Sampler can benefit your application with the following resources.
Spec Sheets
Model A Sampler Spec Sheet
Instruction Manuals
Model A Instruction Manual
Marketing Materials
Automatic Sampler Brochure
Application Guides
Bulk Solids Application GuideNeed Something Else?
Review some other related products that could help your current application.
Model RPG Bulk Solids Sampler
Model PR Bulk Solids Sampler
SBC Controller
