SAL-DBB Automatic Sampler

Download Specs

Email Specs

Get Started

Request A Quote

Not What You're Looking For?

Designed for highly abrasive applications, the ISOLOK SAL-DBB sampler collects samples to ensure you are obtaining quality product and making intelligent decisions.

This sampler is made with patented double block and bleed technology that fully isolates the operator from the process.

Designed for less maintenance, the ISOLOK SAL-DBB sampler extends plunger life with short actuation lengths and does not require complete disassembly to change plunger seals. However, when maintenance is required, no special tools are needed for the sampler disassembly.

This safe, reliable ISOLOK sampler is lighter than most industrial equipment at approximately 18 lb (8 kg) making any removal less labor intensive.
A variety of customizations are available from port closures, line adapters, different containers, and more.
All SAL-DBB are adaptable to ISOLOK SAL-B products, making it easy to install on existing sampling points.

Download Specs

Email Specs

Temperature

ISOLOK SAL-DBB can seal against up to 720 PSI at 450˚F (49.7 bar at 232˚C).
The recommended operating temperature is 1050 PSI at 100˚F (72.4 bar at 38˚C).

Pressure

The SAL-DBB recommended operating pressure is 400 PSI (27.5 bar) at 80 PSI (5.5 bar) air compression.
However, it can handle up to 500 PSI (34.4 bar) at 100 PSI (6.9 bar) air compression.

Particle Size

The maximum particle size for this ISOLOK is .375 in (9 mm).

FAQ Sampling Questions

We warrant our products to be free from defects in workmanship and materials with conditions and limitations. View our standard warranty in detail to learn more about your coverage.

Sentry's bulk solid and ISOLOK sampler maintenance schedules depend on the application. However, it is recommended to clean your equipment every 6 months and review cycle counts to determine the average change time of seals. You should also document every failure for a more robust maintenance schedule.

Serial numbers can be found stamped on the product itself, on an adhesive nameplate or on a stainless steel tag.